In the propagation of plants from cuttings or otherwise, the amateur, with limited facilities, of course cannot compete with the trained and experienced propagator, who makes the rearing of plants his business, devoting his whole attention to that special branch. Many men have devoted the greater part of a lifetime to experiment and study, as to the best and most practicable methods for the successful propagation of plants. There are, however, common and ordinary methods for propagating plants from cuttings, that the most inexperienced can practice with a measure of success. All florists root their cuttings in sand, and that obtained from the beach of some fresh water lake is the best for the purpose, being free from gravel and clay, and will not hold water long. If lake sand cannot be easily obtained, common building sand will answer by thoroughly washing it with several waters to free it from clay, etc. I can recommend to the reader no more simple and practical method of propagating plants on a small scale, than the following, from the pen of an experienced florist, which expresses my own views exactly:

"Take a pan, or dish, at least three inches deep—the circumference of which may be as large as you wish, fill to within one half inch of the top with sand. The cuttings are to be inserted in the sand, which is made very wet, of the consistency of mud. The pan should then be placed on the window case, where it will receive the full light of the sun, which will not injure the cuttings in the least, providing the sand is kept constantly wet, being careful to never allow it to become dry for a moment, otherwise the plants will be lost.

"'Is there no drainage from the pan necessary?' none, the atmosphere will evaporate the water fast enough to prevent any stagnation during the brief time required for the cuttings to take root."