A POP-GUN

Previous

Materials Required:—

A large goose quill, a small twig, a slice of raw potato, a penknife.

Fig. 59.

This is a most simple little toy and very easy to make. Get a large quill feather with as wide and strong a quill as you can, and cut it off where the quill is thickest. Then get a little stick or branch, preferably a little bent at the thicker end, and peel and smooth it, so that it will fit nicely into the quill with the thicker bent end projecting. This makes the ramrod, but it must be fitted into the quill so that it reaches only within half an inch of the pointed or smaller end. Now take a slice of raw potato about half an inch thick or a little more, and into it push the wider end of the quill so that it takes out a neat round piece of the potato. With the ramrod gently push this first "bullet" to the smaller end of the quill and take out another slice from the potato with the wide end. Now quickly and smartly push in your ramrod and you will find your first bullet shoots off splendidly, leaving your second one at the point of the quill ready for the next shot. Large popguns can be made with a piece of tin tubing, or even cardboard rollers and corks used as bullets. The ramrod must be padded with cotton wrapping in order to fit the tube closely.


                                                                                                                                                                                                                                                                                                           

Clyx.com


Top of Page
Top of Page