Materials Required:—

Four or five quills from a chicken's wing, some very fine pins, a little thread, scissors.

This is made of small quill feathers and is very pretty. Use feathers which are large enough to hold a pin inside their hollow tubes. Cut off a thick piece of quill for each of the four legs and entirely strip them of webbing. Cut and strip rather thinner ones for the spars to support these, and fix as in Fig. 76, using very slender pins. If the quills used for legs are strong enough, the feathers for the sea may be pinned on also, but if they are inclined to split, those for the seat must be lashed on, and therefore must be cut so that they project at the ends beyond the legs. Cut each of these like A in the diagram, so that the webbing is cut straight across at the end furthest from the point of the quill. Fix each of these four quills into place with the webbing overlapping the sloping end of the quill in front of it.