Hams, Shoulders, Bellies and other cuts must be thoroughly chilled before they are put into pickle. From one to two days before being packed, depending upon the temperature, they should be hung up or laid on a rack in the cooler, in order to draw out all the animal heat that is in them and to make them firm and ready for packing. Packers, using ice machinery for cooling, can bring the temperature low enough during the warm weather to properly chill the meat; however, it must not be frozen. If the cooler in which meats are chilled is not cold enough to make the Hams, Shoulders, Bellies, etc., firm and solid in 48 hours, it is advisable to lay the meat on the floor over night and place crushed ice over it; this will harden the meat. Those using a common ice house can employ the crushed ice method, which is to spread the meat on the floor and throw cracked ice over the meat, allowing it to remain over night. It should always be remembered that if meat is put into brine soft and spongy, it will become pickle-soaked and in such condition will never cure properly. It will come out of the brine soft and spongy, and will often sour when in the smoke house. A great deal of meat spoils in curing only for the reason that the animal heat has not been removed before the meat is packed and placed in brine. When the animal heat is all out of the meat, the meat will be firm and solid all the way through. In order to get the best results, the inside temperature of Hams and Shoulders when packed, should not be over 36 to 38 degrees Fahrenheit. The meat should be tested with a thermometer made for this purpose before it is packed. Every curer of meat should have one. An illustration of same will be found on page 284.