Making a Camp

Previous

METHOD OF THATCHING A LEAN-TO

The first thing to be considered on going into the forest is the camp where the night is to be spent. In choosing a place for this see that there is fresh water, wood for the fire and brush-wood for building a "lean-to," or hut, at hand. It is well to build on a dry, level place, with just enough slope to the ground to insure the water running away in case of rain. The Indians used to live in huts thatched with brush-wood, and these are best made by building what is known as a "lean-to." Look for two trees standing from eight to ten feet apart on your camping place, with branches from six to eight feet above the ground. By placing a pole from one tree to the other in the crotches and leaning other poles against this one, brush-wood can be woven in to form a very good roof. Branches of the balsam or hemlock are best for this purpose, and the needles should point down. It is well to collect as many soft, thick tips of trees of this character as possible, both for the thatching and to make the beds. Cover the floor of the "lean-to" with these tips thickly and lay the rubber blankets on top, rubber side down. Be sure to make the head of your bed toward the inside and away from the opening. You will find that this makes a very comfortable bed.

HOW TO BUILD A LEAN-TO


                                                                                                                                                                                                                                                                                                           

Clyx.com


Top of Page
Top of Page