HOW CAN THE VELOCITY OF THE ELECTRIC CURRENT BE ASCERTAINED.

In order to illustrate, how the velocity of the electric current can actually be measured, we must first introduce the following:

Whenever a wire is to be magnetized by an electric machine, at the moment it touches the machine, a bright spark is seen at the end of the wire. The same spark is seen also at the other end of the wire, if touching another apparatus. Let us call the first spark the "entrance-spark," the other the "exit-spark." If a wire, many miles in extent, is put up, and led back to where the beginning of the wire is, both sparks may be seen by the same observer.

Now it is evident, that the exit-spark appears after the entrance-spark just as much later, as the time it took the electric current to run from one end of the wire to the other end. But in spite of all efforts made, to see whether the exit-spark actually appears later, the human eye has not been able to detect the difference. The cause of this is partly owing to the long duration of the impression upon the retina, which leads us to the belief, that we see objects much longer than we really do; partly, the immense rapidity with which the exit-spark follows the entrance-spark. From these two causes, we are tempted to believe both sparks to appear at the same moment.

By an ingenious and excellent means, however, this defect in our eye has been greatly diminished. It is well worth the trouble to read a description of the experiment attentively. The truly remarkable way in which it was tried, will please all who read it.

In order to measure the velocity of the electric current, the ends of a very long wire are placed one above the other. If, now, one makes the observation with the naked eye, both sparks will be found to stand in a vertical line, one above the other, as the points of a colon, thus (:).

But he who wishes to measure the velocity of the electrical current does not look upon the sparks with the naked eye, but into a small mirror, which, by a clock-work, is made to revolve upon an upright axis with exceedingly great rapidity. Thus he can see both sparks in the mirror. If the apparatus be a good one, it will be observed that the sparks, as seen by the aid of the mirror, do not stand in a vertical line above one another, but obliquely, thus (.·).

Whence does this come?

The reason of it is, that after the appearance of the entrance-spark it takes a short time, before the exit-spark appears. During this short time the mirror moves, though but little, and in it the exit-spark is seen as if it had moved aside from the entrance-spark.

Hence, it is through the movement of the mirror that the time, which is necessary for electricity to go through the circuit of the wire, is ascertained. A little reflection will readily convince the reader, that the time may be precisely calculated, provided three things be known, viz.: the length of the wire, the velocity of rotation of the mirror, and the angular distance of the two sparks as seen in the mirror. Thus: Suppose the wire to be 1,000 miles long; and suppose the mirror is made to revolve 100,000 times in a second. Now, if the electrical current traversed these 1,000 miles of wire during one revolution of the mirror, then it follows, that the current must move 1,000 miles in the 1/100 part of a second; or, 100,000 miles in a second.[1]

It is found, however, that the mirror does not revolve an entire circle, or 360 degrees, while the current is passing over 1,000 miles of wire, but we find that the mirror turns through 144 degrees very nearly; therefore the electric current must travel more than 100,000 miles a second. How much more? Just as many times 100,000 miles, as 144 degrees are contained in 360 degrees (the entire circle), viz., two and a half times. Hence, the current travels 250,000 miles in a second.

PART III.