EDGING No. 3.

Previous
EDGING No. 3.

Fill the shuttles with the same cottons as in the 1st Edging, and use the same pins. The coarser sizes will make this edging an inch and a half deep. Tie the cottons together.

Begin an oval with the plain shuttle; 3 D, L, 3 D draw tight. With the plain shuttle thread work 4 D.

Begin a looped oval with the plain shuttle; 2 D (L, 2 D 5 times) draw very tight.

The Leaf. Begin a figured shuttle oval; 2 R D (L, 2 R D 5 times) join to the 3rd L of the last row of the Rosette; 2 R D (L, 2 R D 14 times) draw tight. At a little distance begin a plain oval with the figured shuttle; 3 D join to the thread of the Leaf under the join; 3 D draw close. Begin a plain oval with the figured shuttle quite close to the last; 3 D join to the thread under the 9th L of the 14 of the Leaf; 3 D draw tight. Tie round the foundation thread of the two plain ovals, and leaving a short space of cotton, tie between the 4th and 5th Ls of the 14 of the Leaf; tie again below the plain ovals and round the foundation thread of the leaf.

[With the plain shuttle thread round the little finger, 4 D. Begin a plain shuttle oval, 3 D; L, 3 D draw close. Work a similar figured shuttle oval, and tie round its foundation thread. Repeat twice.] With the plain shuttle thread, 4 D.

The Rosette. Leave a space of each cotton. Begin a figured shuttle oval, 1 D (L, 1 D 7 times) draw close. With the plain shuttle thread (L, 1 D 7 times). [Begin a figured shuttle oval, 1 D (L, 1 D 3 times) join to the centre L of last oval; 1 D (L, 1 D 3 times) draw tight. With the plain shuttle thread (L, 1 D 7 times). Repeat 3 times.] Tie to the foundation thread of the 1st of these ovals. Tie to the 1st L of the 1st 7. With the plain shuttle thread round the little finger (L, 1 D tie to the next L but one 11 times). Tie with the plain shuttle thread to the 15th L of the leaf; 1 D tie to the next L but one. Tie with the plain shuttle thread to the L of the 1st figured shuttle oval; 1 D tie to the next L but one. Tie with the plain shuttle thread to the L of the 2nd figured shuttle oval; 1 D tie to the next L but one, [4 D. Begin a plain shuttle oval, 3 D, L, 3 D draw tight. Begin a figured shuttle oval, 3 D join to the 1st L of the last round of the Rosette; 3 D draw tight and tie to its foundation thread. Repeat once, joining the figured shuttle oval to the 2nd L of the Rosette,] 4 D. Repeat to the required length, beginning with the looped oval.

For the Foundation. Tie the threads together in the L of the 1st plain shuttle oval, holding the work in the hand and the right side up. With the plain shuttle thread round the little finger (L, 1 D, 4 times) tie in the 3rd L of the next oval, (L, 1 D, 4 times) tie in the L of the next oval, [(L, 1 D, 3 times) tie in the L of the next oval. Repeat 3 times.] Repeat from the beginning till all the ovals are finished.


                                                                                                                                                                                                                                                                                                           

Clyx.com


Top of Page
Top of Page