To Cut a Bottle With a String.

Previous

Gum first two circular pads of paper on each side of the spot where you intend to cut your bottle. These pads are obtained by gumming several strips of paper one over the other, so as to leave between them a groove on which you wind the string round once.

Catch hold of the extremities of the string, and draw it to and fro, see-saw fashion, by which friction the part of the glass operated on will be heated.

As soon as you think that the glass is hot enough, plunge the bottle in cold water, which you will have placed handy before, and at the spot where the friction was exercised the glass will be clean cut. According to the thickness of the glass, more or less heat must be produced. This process is infallible.

The same result can also be produced in another way. It is, when once the heat is sufficient to let glide a few drops of water along the string. The string must be well wetted. The cut will be as clean as by the other process.


                                                                                                                                                                                                                                                                                                           

Clyx.com


Top of Page
Top of Page